this post was submitted on 27 Jul 2024

38 points (95.2% liked)

Ask Lemmy

26707 readers

1398 users here now

A Fediverse community for open-ended, thought provoking questions

Please don't post about US Politics.

Rules: (interactive)

1) Be nice and; have fun

Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them

2) All posts must end with a '?'

This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?

3) No spam

Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.

4) NSFW is okay, within reason

Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected]. NSFW comments should be restricted to posts tagged [NSFW].

5) This is not a support community.

It is not a place for 'how do I?', type questions. If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.

Reminder: The terms of service apply here too.

Partnered Communities:

Logo design credit goes to: tubbadu

founded 1 year ago

MODERATORS

[email protected]

Is there a way to test the data transfer speed of USB cables? (lemmy.world)

submitted 3 months ago by [email protected] to c/[email protected]

15 comments fedilink hide all child comments

If you're like me, you have dozens of USB-A and USB-C cables. There are all of various quality, but I have no idea the history of each one. A lot of them came with other products and are total unknown quantity anyway.

Is there a tool to quickly test how good each cable is? Either a software or a hardware tool. Ideally it'd be nice to see something that can measure the power as well. Some charging cables are capable of fast charging, and some are not.

top 15 comments

sorted by: hot top controversial new old

[–] [email protected] 16 points 3 months ago* (last edited 3 months ago) (2 children)

Linux lets you see your USB tree with lsusb -t. That includes negotiated data transfer speeds.

This doesn't, strictly-speaking, give you the cable speed, but it does give you the link speed to another USB device, so if you have a computer with a fast USB controller and a fast USB device (probably a new hub would work well here), such that any limiting factor is the cable, you can see what speed they have negotiated over the cable, which I suppose effectively tells you what speed the cable can support.

A snippet of mine:

/:  Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/5p, 20000M/x2
    |__ Port 005: Dev 005, If 0, Class=Hub, Driver=hub/4p, 5000M
        |__ Port 003: Dev 006, If 0, Class=Hub, Driver=hub/4p, 5000M
        |__ Port 004: Dev 007, If 0, Class=Hub, Driver=hub/4p, 5000M
            |__ Port 001: Dev 008, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 005.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 480M
    |__ Port 002: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 004: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M
            |__ Port 001: Dev 004, If 0, Class=Human Interface Device, Driver=usbhid, 12M
            |__ Port 001: Dev 004, If 1, Class=Human Interface Device, Driver=usbhid, 12M
            |__ Port 002: Dev 005, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
            |__ Port 003: Dev 006, If 0, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 003: Dev 006, If 1, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 003: Dev 006, If 2, Class=Human Interface Device, Driver=usbhid, 12M

Those numbers there (20000M, 5000M, 480M, 12M, 1.5M) are the data transfer rates supported to the device.

[–] [email protected] 1 points 2 months ago* (last edited 2 months ago)

@[email protected] The cables do have an "emarker", which does let them indicate identifying information, but it apparently at least as of eight months back, that information wasn't exposed by the Linux kernel:

https://old.reddit.com/r/UsbCHardware/comments/qm34dj/how_to_check_usb_version_of_a_usbc_cable/

Not yet. Some low-level changes need to be made to the Linux kernel and the underlying UCSI interface, so there's not anything you can build at the moment to make it happen.

If you happen to be a skilled linux kernel engineer with experience in USB specifications and more specifically the UCSI specification, and want to help, then contribute on this mailing list: [email protected]

Dunno about other OSes. There's also dedicated diagnostic hardware, but unless you want that, the above approach I gave may be your best bet currently.

[–] [email protected] 1 points 3 months ago

Neat

[–] [email protected] 10 points 3 months ago* (last edited 3 months ago) (1 children)

There's some hardware tools on amazon that will test the power capacity, but I'm not sure about speed. Some check the characteristics of the cable, so it would stand to reason that if those characteristics are within spec, then it should perform as expected.

Something like this does A and C: https://www.amazon.com/Eversame-Multimeter-Voltmeter-Indicator-DC3-6-30V/dp/B07JYVPLLJ

Not sure how good / reliable / accurate they are. I've seen some homemade projects which aim to do similar, but if you're like me and not great with a soldering iron, you might need to make due with something from Amazon lol.

The sad fact is USB-C cables are just a confusing mess of optional features. I tend to just buy ones that are rated for 100W power delivery and have video support. Those tend to cover all my bases.

[–] [email protected] 3 points 3 months ago (3 children)

I wtf'd that you could do 100W w/ USB... Then I can see that new specs are to allow 240W.

[–] [email protected] 5 points 3 months ago

Yeah, that's pretty recent. All my chargers are 100W or less. I think the 240W is achieved by increasing the voltage to 48v and keeping the current maximum to 5A.

[–] [email protected] 1 points 3 months ago

Well you can power things like egpus, monitors and gaming laptops soon. Very neat actually.

[–] [email protected] 1 points 3 months ago

5 USB cables could power my heater :/

[–] [email protected] 7 points 3 months ago* (last edited 3 months ago) (1 children)

I am waiting for the BLE caberQU to come out of prototype because it has some top notch capabilities.

There is a showcase of the tester here
https://www.youtube.com/watch?v=6bZ0y9G-4Pc

[–] [email protected] 4 points 3 months ago

Wondering about the cost. Hardcore USB test/analysis devices can hit 4-5-digit $$$. If this hits $50, it'll clean up. But I have a feeling it'll be on the high end.

[–] [email protected] 2 points 3 months ago

Get a USB hard drive and test how long it takes to transfer a file onto that hard drive using each cable.

[–] [email protected] 1 points 3 months ago (1 children)

You could plug each one in and see what you're phone says for 'time to full.'

[–] [email protected] 1 points 3 months ago (2 children)

I think there's a misunderstanding.

Time to full usually refers to charging speed.

The post is asking about data transfer speeds.

[–] [email protected] 1 points 3 months ago* (last edited 3 months ago)

would weed out the super shitty ones maybe. but yeah, not accurate for data transfer.

[–] [email protected] 1 points 3 months ago

Oh, yeah, sorry.