Linux

macOS Spaces (virtual desktop) allows the user to have multiple desktops PER MONITOR. When a user switches a space, it’s not the entire set of monitors, just the one they are in.

Is there a way to do this in Plasma 6, or… even GNOME?

I recently installed Linux mint ane was unpleasantly surprised that it is virtually impossible on every desktop environment, as opposed to Ubuntu on which it required very little.

I used to hate android emulators, since the ones I'd tested on Windows were ad-ridden, slow bloatware.

The other day I needed to run an android app on Fedora 40.

I tried Waydroid and it worked very well. The app ran supersmooth as if it was running natively.

Also the cli syntax was very sane an user friendly.

waydroid app install|run|list ...

So if you need an Android app on linux the experience might be better than what you think it would be.

I did it again; exaggerate a simple idea and make it look more complicated at the end with too much text in the readme. I was bothered with the output of file listings and how unreadable they can get, especially with long paths and many of them on screen. At the end, I am not sure how useful this will be in the long run, but that is something you can judge yourself. It was certainly fun to create and in my opinion it's also fun to use.

git clone https://github.com/thingsiplay/fpath
cd fpath
chmod +x fpath

What is this? Convenience script to style and reformat the output with path like formats. Designed to combine listings from other programs output, such as from find and even ls, or any other tool with similar capabilities. The script works mostly on text data rather than the file system, but some special commands are exception to this rule and will access the file system.

I've tried to find them to no avail. I'm guessing the box sets just aren't made anymore, but I figured it's worth asking in case there's some obscure one out there somewhere.

To clarify, I'm looking for a more recent Linux version. I know the older ones can be found on auction sites and the like.

My mouse won't stop constantly scrolling and a replacement is a couple days away. How can I temporarily disable the scroll wheel? All the instructions I can find deal with xorg or xinput which I do not have. I can't find any scroll wheel setting in either settings or piper.

Optionally just being able to disable it in firefox would save my sanity.

Thanks for any help.

Dangerous opinion, I've recently moved to Fedora after Ubuntu and after customising it on the GNOME desktop, it's literally Ubuntu (But better) in every way except no snaps.

Personally as someone who got the ground running using Ubuntu as my 1st Linux distro, fedora is a comfortable transfer and I really like their spins.

Sure DNF can be slow but you can fix that and sure redhat can be a little... difficult with their decisions.

What do you think of Fedora? So far I enjoy the stability combined with near-arch levels of getting new updates!

Hey y'all

So I've been a big anti-Wayland shill around here but decided to finally give it a shot, I installed Debian 12 with GNOME, and can't seem to get Plank working.

Without the Plank dock, GNOME is unusable, and KDE refuses to autostart Guake (does not save the setting in autostart), and when it works it seems broken (stuck to the left side of the screen).

These are fundamental apps to me for any decent Linux laptop use. What gives? Is there an alternative?

I have a lot of old movies, most will barely be 720p.

I ripped them off DVDs with MakeMKV and have sometimes 7GB files for 1,5h.

I want to convert them to something below 300MB, I often see more modern torrented movies below that size, so this should totally be possible.

They will only ever be played with VLC (Windows) or Celluloid/MPV (Linux) with hardware decoding.

But what codec to use? h264 and h265 are nonfree, arent they? But Videolan has some free variant of it and Cisco also offers their free version for h264?

Never heard of VP8 and VP9. Then there is AV1 but that seems to only have "264K 360° Surround sound 3D VR" options.

Man I just want to encode normal movies 🥲

What about webm? That is under "web" but probably also good?

I suppose I should use h264 for compatibility, but the web stuff will also be compatible. I would like the best and fanciest algorithms to have least dataloss.

Also, what to use for the audio? I think opus is best.

Thanks!

https://github.com/MHNightCat/superfile

So i downloaded opensuse iso on my pendrive with ventoy, but during installation I'm getting errors due to not matching 5SMD code or smh like that, is there a any way to install system to get a fixed iso?

Context:

I updated my system last night (EndeavourOS) and it looks like the kernal didn't update correctly. When I restarted the system and entered my password for the encrypted drive, I get an error:

[FAILED] Failed to mount /efi
See 'systemctl status efi.mount` for details.

I can't remember the commands I used last night but I was able to check the version of the kernel I am using currently - uname -r I believe - and what is installed. There was a difference in versions.

Trying to fix the problem:

I attempted to chroot into the system via a live USB - tutourial, arch bbs & arch wiki.

However, when trying to mount the drive (/dev/sda2) I get an error message: mount: /rescue: unknown filesystem type 'crypto_LIKS'. I tried using cryptsetup luksOpen' and 'udisksctl unlock -b' but both return a similar error saying it is not an encrypted device. See fdisk -l results below:

[[email protected] ~]$ sudo fdisk -l
Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors
Disk model: TOSHIBA KSG60ZMV
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: FC41E181-15E3-4444-8240-E68D52AFD07E
 
Device         Start       End   Sectors   Size Type
/dev/sda1       4096   2052095   2048000  1000M EFI System
/dev/sda2    2052096 481648511 479596416 228.7G Linux filesystem
/dev/sda3  481648512 500103449  18454938   8.8G Linux filesystem
 
 
Disk /dev/sdb: 57.3 GiB, 61524148224 bytes, 120164352 sectors
Disk model:  SanDisk 3.2Gen1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7498467c
 
Device     Boot   Start     End Sectors  Size Id Type
/dev/sdb1  *         64 5249887 5249824  2.5G  0 Empty
/dev/sdb2       5249888 5575519  325632  159M ef EFI (FAT-12/16/32)
 
 
Disk /dev/loop0: 2.35 GiB, 2520530944 bytes, 4922912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

Snapper Snapshots:

I recently setup snapshots with Snapper since I'm using BTRFS. From what I understand, I can just roll back my system to before the system update (it takes a snapshot before and after installing anything) but I got confused on how to do that last night - troubleshooting at 2AM with a lack of sleep will do that...

What is the best way forward? I'm happy to provide more information if it helps.

EDIT: Output of lsblk

[[email protected] ~]$ lsblk -f
NAME   FSTYPE      FSVER            LABEL       UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
loop0  squashfs    4.0                                                                     0   100% /run/archiso/airootfs
sda                                                                                                 
├─sda1 vfat        FAT32                        0BC7-CF22                                           
├─sda2 crypto_LUKS 2                            5c6d5430-3706-48e8-bffb-f680d8c19dda                
└─sda3 crypto_LUKS 2                            81a912d5-fb81-40ed-a60f-0af27314b661                
sdb    iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                              
├─sdb1 iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                     0   100% /run/archiso/bootmnt
└─sdb2 vfat        FAT16            ARCHISO_EFI 7156-9697  

EDIT 2:

[[email protected] ~]$ lsblk -a
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0    7:0    0   2.3G  1 loop /run/archiso/airootfs
sda      8:0    0 238.5G  0 disk 
├─sda1   8:1    0  1000M  0 part 
├─sda2   8:2    0 228.7G  0 part 
└─sda3   8:3    0   8.8G  0 part 
sdb      8:16   1  57.3G  0 disk 
├─sdb1   8:17   1   2.5G  0 part /run/archiso/bootmnt
└─sdb2   8:18   1   159M  0 part 

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=0BC7-CF22                            /efi           vfat    fmask=0137,dmask=0027 0 2
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /              btrfs   subvol=/@,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /home          btrfs   subvol=/@home,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /var/cache     btrfs   subvol=/@cache,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /var/log       btrfs   subvol=/@log,noatime,compress=zstd 0 0
/dev/mapper/luks-81a912d5-fb81-40ed-a60f-0af27314b661 swap           swap    defaults   0 0
tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0 0

EDIT 3:

I think I have fixed it. I have chrooted and am busy running sudo pacman -Syu

EDIT 4: /efi still fails to mount.

What are we doing for disk imaging theses days?

I'm pretty comftable with linux mint right now but i want to peruse the wares so to speak, what are some cool or interesting distros that do things differently than mint?

Edit: i dont wanna distro hop people cool your jets, i just wanna look around cos i find it neat :3

Trying out Kitty terminal and two things are apparent

1. The font size is either huge or zoomed way in
2. Editing the config seems to do nothing.

Any help would be great.

Hey folks, I just got Bazzite OS KDE up and running on my PC. Being a Linux newbie, I'd love some tips, tricks, and app suggestions if you have any. 😅 Switching from Windows has been a bit of a maze with all the distros out there, so any pointers would be awesome!

The amount of tutorials out there is overwhelming. Hopefully 🙏 you guys point me in the right direction.

Edit: That is a lot of great information. I really appreciate you guys taking your time to share your experience/advice.