Ask Lemmy

I dont know if its really "Lesser Known", but pest control is a very interesting field to work in and isnt often talked about in many circles.

Its essentially future proof, as we're always going to have pests. Its one of those jobs where its the same enough every day that you get a little better, but different enough from call to call to keep you challenged and stay interested.

I wished that I had even considered it an open back in High School and gone to college/university to actually study pests in an academic setting, and be able to participate in some of the groundbreaking work taking place currently.

For one glorious summer I was a small boat sailing instructor at a summer camp. My life was sitting on the beach and teaching kids to sail. I had a wonderful tan, and sun bleached hair. My life was stress free and wonderful. I got into it by learning how to sail at that very camp, and applying for the job. It paid minimum wage, but it also came with free room and board, and I was a kid, so I didn't really need any money anyways.

Not in this field anymore, but used to be a landscaper for a handful of years.

A lot of people think that landscaping is just grass cutting, but it's called that because you are literally scaping the land, and sometimes beyond that.

Hell, roof work, foundation laying, pressure washing, among other things, have been a part of my duties during my time in that field.

I work in the surgical pathology department in a hospital.

Anything you get removed from surgery comes to me to be examined. Then I describe what I have and what sort of pathology I can see with the naked eye. I select and cut out pieces of tissue that are important to the case. The tissue undergoes further processing and eventually reaches the desk of a pathologist (a type of physician) who examines the tissue microscopically, forms a diagnosis, and ultimately signs out the case.

My job can assist with several things depending on the case...

1. To help the clinician confirm or determine what type of lesion or disease process the patient has
2. To document and confirm that a surgery was necessary
3. To stage cancer cases
4. To determine whether or not a cancer or lesion has been completely removed from the patient and there is none left inside their body
5. To make sure the patient does not have an unsuspected cancer

I see everything from tiny boring specks of tissue they biopsy during a colonoscopy to large cancer resection cases.

The other day, I got an almost entirely necrotic above the knee amputation with maggots. A few days before that I got a 9 lb spleen. It's fun in the lab.

In the US, my job generally requires a very specialized 2 year master's degree (on top of a bachelor's degree in any subject). In other countries, the role of my job can be fulfilled by different types of people depending on the country and education will be different.

I found out about the job on Google lol. I was looking for something hands on in healthcare or anatomy related, but I didn't like patient contact. I would probably select this career again if I had a second go around. It pays pretty well and is interesting. But grad school in the US is very expensive.

From 2005 to 2008 in South Florida I created and ran a permit expediting company. It came from my mom managing a construction company, them having too many contracts, and not enough contractors to run their own permits. I saw a need and got together with a couple of friends to incorporate.

We pitched it to the owner of the company my mom managed and got a contract from them. We eventually picked up other companies as well.

So the job went like this: one of us be assigned to a specific geographic area or company for the day, we would stop by the office, pick up the paperwork for whatever permits had to be filed, retrieved, delivered.

We would visit the city building department and depending on the city (each ran things in drastically different ways with no consistency) we would be there for 15 minutes or all day. Some permits would be a quick, single day turnaround or could be in bureaucratic hell for a month or two. We'd charge based on the complexity and time involved in getting permits approved. Then we would either deliver the permits to the contractor or the job site. On occasion we would deliver liens to customers who didn't pay their bills which could sometimes get dangerous.

The only people I've ever met that did this exact type of work were people I met within city building departments. It's a relatively boring, but uncommon profession.

The job came with all kinds of weird knowledge that I've never had to use again, like how many palm trees on the property equal a shade tree for the purpose of landscaping requirements. Than answer back then was 3.

The company was born out of a construction boom after Hurricane Katrina and died during the housing market crash of 2008.

Edited for spelling and sentence structure.

Also edit: sometimes getting permits approved would involve meeting with city engineers, making corrections on engineering documents, and just having a good rapport with the city.

Also, currently I am a change control analyst for a telecom company. My job description literally says "protect the network". Essentially network engineers submit projects to me, I check the projects for accuracy, impact risk, importance, etc. A lot of the time, I reject work because of errors, cutting corners, not enough preparation, etc.

My job is to balance the projects being done VS how many customers I want to piss off because their services get taken down. My engineers either absolutely love me, or would like to have the opportunity to stab me in a dark alley, there really is no in between. Generally the ones I reject often for crap work are the ones that also want to stab me.

This is an absolutely boring one, but did you know part of your seatbelt, right now, could just be colored in?

How about your seat cover? Your steering wheel? Some poor bastard had to go get that out of stock, bring it into repair, go over the entire lot, and take a special pencil to color in those little scratches, or mark it as unrepairable.

I was that bastard for awhile. It sucked. 10 hours going over whatever needed checking that day. An "exciting" day meant a defect hit the line and we needed to hunt it down, hopefully without stopping production.

"Repair" can cover a lot of things, and that was the worst repair work I've ever done.

It's becoming more common, but I work in the cannabis industry. People don't tend to know much about exactly what I do and how weed sales works. The education and certification side of this is actually super unique. You do have to get a basic agent ID, but it's really more of a background check than anything. But, because the rec market is so very new here, you are basically required to have broken the law extensively to have the knowledge and experience needed to sell weed. Everyone I work with has a criminal past, even if they never got busted. I talked about buying psychedelics on the darkweb in my interview, and my HR person knew exactly what the fuck I was talking about. It's just one of the many wonderful things about working in cannabis <3

I work in disaster planning - so if you want a really good disaster to happen then give me a call.

To be more serious:

I write disaster response plans mostly for the medical field, e.g. hospitals, nursing homes. That starts with ordinary fires and flooding, but also includes things like "IT outtakes"(which kill far more people than fire each year), "supply line collaps", etc.

We also train staff, mostly management, and conduct full scale exercises. Additionally I write medical intelligence and evacuation reports. These are basically "plans" for aid workers, expats. that go to risky places: "Oh, I broke my leg in bumfuck nowhere South Sudan! What now? Is there a hospital? Which one do I go to? Which one has actual doctors? Is there a chance that a medical evacuation plane can reach me?"

Originally I am a critical care paramedic and I am currently studying towards (another) master degree in healthcare management. Before I founded my current company I worked as a consultant for various healthcare related firms, before that as an ambulance service director.

But mass casualty situations always were "my thing" and the multi-stakeholder approach I take during planning talking to basically all roles in a hospital, from the higher ups to the guy in charge of waste disposal, is something I enjoy immensely.

I’m a kiln operator. I run a giant oven to dry red and white pine.

Dropped out of uni. Various retail and tech jobs for about 12 years. 4 years disability. Took an interview at a lumber mill because ‘cool tour’, took a job because ‘paycheck for a little while anyway’. Ran a planer for about 6 weeks and then offered kiln operator when their previous was poached.

On the job learning for me with the caveat that it was not a reasonable expectation to set. Typically one works under a senior operator for about two years not ‘you’re on your own but you’re good at google right?’

Certified by my work for government heat treatment programs, front loader/forklift operation and working at heights. One of those jobs where mindset is more important than education.

Would I do it again? Yes? I’d want more money for the work. There’s not a lot of people who will write an algorithm to interpret the data they gather in a 50c box. It’s a really intense combination of intellectual and manual labor and the compromise seems to be to plop the pay in the middle. Good pay for a lumber mill but shit pay for developing processes, an inventory system and an entire goddamned iOS app(that my boss didn’t even understand much less appreciate).

I wouldn’t expect the door to be open again in the future. There’s not a lot of kilns to run, they are increasingly automated and it’s a job people hold til retirement. The manager who hired me took a massive gamble on a physically disabled but intelligent person so that’s not easy to find either. Owner runs under the ‘warm body is better than no body’ premise. There’s not even any other mills close enough with kilns that I have other employment opportunities. I’ve got a very specific and reasonably lucrative skill set for a rare job.

I'm a designer, which is a well-known profession, but I design substations, which almost no one I've run into has heard of.

Substations are like giant jungle-gyms for electricity. They're a grouping of electric structures that transfer high-voltage electricity to low-voltage, or low voltage to high voltage. They're a major part of our electricity distribution system. You drive by at least one every day, most likely.

I got into it by chance. Right place, right time. I went back to school and got my AS in drafting for industrial design and manufacturing. I applied to this job on accident, thinking it was for manufacturing, then when I was offered an interview, accepted it despite the mixup. Why not? They offered about double what other jobs were for a drafter, so I took it.

8 months into the job, a designer position opened up, so I interviewed for that and got the promption!

Door is still wide open, despite the general idea that drafters are becoming less of a demand. Based on my experience, they're sorely needed, especially for civil jobs. Also I get paid higher than a friend of mine who got her masters in interior architecture (also a drafting/design gig), with just my AS. I'd do it all over again in a heartbeat. Totally worth it.

I have a typical job, but just today I was reading an article about different types of potatoes, and they quoted a post harvest potato physiologist.

I work in a museum adapting internationally touring exhibitions to align with their host communities. It's a great career - there's travel, I get to see behind the scenes of museum collections, and I get to study other cultures as a job. I do get paid to match the fact that I work for a charity.

My background is in the museum sector, which you can get into either through a PhD in study of a relevant field to the specific museum, or through a graduate program in museum/ conservation studies (which is what I did).

So far as I can tell, there are only a handful of people that do this job globally, which I suppose makes it lesser known!

I'm a geologist, but not the fun kind that gets to look at actual rocks.

I do environmental and some geotechnical work, which pretty much boils down to "Is the dirt poisoned?" and "How hard do I have to squish the dirt to make the future building not fall down?" There's few things to get excited about, but it's steady work and pays the bills.

I'm an environmental chamber technician. I fix and test the equipment that does all of the temperature and humidity testing for most electronics from consumer grade stuff to stuff that is literally going into space. Basically an environmental chamber is just a programable box that is refrigerated and/or heated that you put stuff into to see how it performs at different temperatures. The ones I work on also often have programable humidity levels for testing equipment under basically any normal atmospheric conditions. The ones I work with are anywhere between the size of a household microwave and slightly larger than Volkswagen Beetle. The ones that don't use liquid nitrogen can manage temperatures anywhere between 200C and -75C. The liquid nitrogen ones can of course manage temps as low as liquid nitrogen gets.

As far as education and certifications go, there isn't much. In the US you do need an EPA 608 certification to work with refrigerants but that only cost like $100 (my employer covered it) and it's a lifetime certification. Everything else was just on the job training. I just got mentored by some coworkers, did some independant study, and practiced. The biggest thing is just haveing a technical mindset. Troubleshooting is troubleshooting so basically if you're someone who can usually figure out how to fix things on their own then odds are you could do my job with minimal refrigeration training.

As far as getting into the same niche today, I definitely would if I could find the job (it's not all that common). I love working with refrigeration and troubleshooting these machines scratches tha puzzle solving itch in my brain. It's fun to see the unique options that certain customers get like water cooled systems or liquid nitrogen boost units. Also seeing as how these machines need to be benchmarked at a known ambient temp, it is one the very few refrigeration related jobs that you get to do from a strictly climate controlled building. It is always exactly 23C in my work area because that's exactly what our testing spec calls for. To top it all off the pay isn't bad. I could be making a bit more in normal HVAC but not much more and, unlike HVAC, my equipment comes to me in my climate controlled shop. I don't have to climb up on a roof when it's 40C outside to fix someone's AC.

I work in the Conference and Events dept of my local college. We're essentially the official school party planners.

I work at a ski place, partially with making snow.

No certs needed, mostly learn on the job type stuff.

A snowmobile license is very useful but hardly required.

I think given the choice I'd pick this again.

Antenna engineer. It's a subset of electrical engineering. It's often referred to as black magic by other electrical engineers but I don't agree with that. That would be an engineer specializing in PIM testing. Anyway, it was a great career and I was able to command a higher salary at first, because if you need an antenna engineer, you need an antenna engineer. Unfortunately very few companies need an antenna engineer so, no, I wouldn't choose it again. Changing companies is too limited. Plus, due to lack of antenna engineers and the high cost of the resources needed to do the job, more companies are moving away from it, preferring to buy off-the-shelf antennas. This means there are fewer and fewer companies doing the real design work.

I got into it, because it was the first professional job I got. Sticking with it was easier than starting over.

My main job is pretty commonplace but I moonlight as a fire performer. I got into it kinda by chance but it has consumed my life. I actually have to carry insurance and do have certifications to do fire. In fact, I'm licensed to write letters of recommendation for new performers. I also have to pull permits for it in my city.

I also do burlesque and sideshow, but there isn't really a formal process other than deciding you want to try hammering a 5" nail into your head. Sideshow is best described as putting things where they DON'T belong. Being a social outcast and knowing people helps.

Would I do it again? Yes, it's a fulfilling art form. But unfortunately the industry is superficial garbage, and the conditions of your birth will greatly affect the ratio between effort put in and success.

I create control systems, currently in the automotive industry but the same principles apply to any control system, which is the thing I love about this subject. The skillset is about trimming down a problem to it's absolute bare essentials. I always wondered what makes machines tick and control theory is the systematic expression of that pursuit. We model the system or phenomena in question and then develop the control in simulation. Once we have the desired result, it is usually realised as a software object that is embedded in a computer.

I started on this path as an unemployed and disillusioned 32 year old engineer, retrained over a period of 2 years and it turned out to be a huge source of fulfillment.

I stumbled into the field of construction cost estimating, because I wasn't watching where I was going, and it has been good to me. There's only an education/certification requirement for the companies that do the largest commercial projects (at least in my region). However, there's a pretty large job market because there are a ton of smaller commercial & residential builders.

I'll never be wealthy, but I make a decent living, and my work/life balance is good. I primarily work in the office, but get out in the field enough to keep it from getting boring. There is also a good ability to move up into project management, which can pay better, but also has a higher stress level in general.

I used to work as a line stander on Capitol Hill in DC. You get paid to stand in line for lobbyists for hearings and committees. Many times your there a day before and camping out overnight with all the other line standers. It’s like an old school concert ticket environment, if you ever camped out for concert tickets back in the day.

I'm a metals engineer. I design and monitor processes to make metals with the right properties for a given application. That means lots of testing to prove it was done right, and testing usually means breaking shit to make sure it has enough strength and ductility.

It has pros and cons. The money is good and demand is higher than supply so it is pretty easy to find a good job, but it is a niche field so I have to go where the work is and aw(mm usually they put these places in the middle of nowhere in shitty republican states that have great corporate tax policies. It is also pretty much exclusively on-site work which means I have very limited choices of where I live.

I am a polymath and am good at lots of mathy sciencey things, I'm hindsight I probably would have picked something that allows for remote work. TBF remote work wasn't much of a thing in 1995 when I chose this field but I wish now that I could work remotely.

All that said it is a good time and has treated me well so far.

I basically failed out of engineering. It turns out I care more about people and systems, so I have a job at a City doing something called Asset Management. Which means I coordinate all the different ways the different departments take care of their infrastructure, and plan for the City to keep doing what they do for 50, 100 years out.

It’s a bit of people, relationships, organization work, finance, engineering, operations, data analytics, planning, risk mitigation, public consultation, blah blah blah. I’ve moved up in the industry to the point where I’m helping other city’s do similar work.

System integrator or automation integration. It has a few names. My title is currently controls specialist but that also changes constantly. I install, setup, and program PLCs to run any type of plant automation. I also set up HMIs and stock tracking systems. I haven't done it in a while but interfacing with SAP used to be a big part my job. Now I mostly just program conveyors and configure HMIs so people can see status without being on the floor.

I started this job by having an MS in ME and taking the first job I could get out of college. It was never my intent to have this career path, but now I kind of like it. It's crazy stressful at times though. Whole production facility can go down for hours if I make mistakes.

I'm a Dev(Sec)Ops Engineer, so I'm basically the guy who makes all the funky stuff in the background so developers can write their apps/websites and automatically roll them out on different environments and versions, also im more or less adding a bunch of tools for this and different platforms so the devs can do that autonomously without me being there 24/7

I'm a county prosecutor (in the US). Prior to law school, I studied horticulture and worked on an industrial hazelnut farm. Law school only required an undergrad degree and a decent score on the Law School Amission Test (LSAT). Law School took 3 years and then a summer to study for the Bar exam. After passing the bar exam, one is generally qualified for an entry level attorney job with most DA offices, but the pay is generally slightly lower than you could find at a private firm.

However, government jobs are often sought out for because they don't generally have a "billable hour" requirement. Billable hours are how attorneys generally charge for their services with a set price per hour. Most attorneys charge by 0.1 hours and each charge must have a statement explaining what it is the attorney did. This is sent to the client at the end of a job or month for them to know how much they owe. Most law firms require a out 1,600 hours per year (33 hours per week). An efficient attorney can probably get their ratio of billable hours to work hours to about 60%. This means if an attorney worked for 10 hours, they would generally only have 6 billable hours. This system often forces people to work longer hours to meet their requirements. However, if an attorney bills more than their requirement, they get a bonus based on amount of money brought in.

If I could do it again, I might do it. I generally like the work environment, pay, benefits, and coworkers, but someday I think I would have enjoyed a more physical job doing something interesting.

Insurance claims adjustment. Lots of investigation, long hours, but often pretty interesting

Idon't currently work. I got rich designing a very specific ball bearing used in those fidget spinners that we really big a few years ago.

..

Just kidding. But it would make for a cool "so what do you do? " intro

I'm a software sales engineer. I was a systems administrator that learned a really in demand product front to back, and incidentally had good people skills and presentation skills. The company contacted me when I left that job and I joined on.

I scope installs, perform architecture reviews, compete with other products, give presentations/demos/conference talks, do hands on training, happy hours, dinners, triage and escalate support issues...

It's been life changing. No more oncall, West Coast / Silicon Valley benefits, lots of fun with customers, and absolutely stupid money in a good year.

Not everyone is cut out for it. It can be very stressful and high pressure, but those who can do very well for themselves.