this post was submitted on 13 Nov 2024
183 points (97.4% liked)

Ask Lemmy

27292 readers
1638 users here now

A Fediverse community for open-ended, thought provoking questions


Rules: (interactive)


1) Be nice and; have funDoxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them


2) All posts must end with a '?'This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?


3) No spamPlease do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.


4) NSFW is okay, within reasonJust remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com. NSFW comments should be restricted to posts tagged [NSFW].


5) This is not a support community.
It is not a place for 'how do I?', type questions. If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.


6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !askusa@discuss.online


Reminder: The terms of service apply here too.

Partnered Communities:

Tech Support

No Stupid Questions

You Should Know

Reddit

Jokes

Ask Ouija


Logo design credit goes to: tubbadu


founded 2 years ago
MODERATORS
 

It would be amazing if it doesn't disintegrate if it rains, too.

top 50 comments
sorted by: hot top controversial new old
[–] TrenchcoatFullofBats@belfry.rip 41 points 1 month ago (3 children)

The comments here are interesting, as I'm helping with a project developing the software stack for mini servers we hope to sell that are preconfigured with Home Assistant (home automation) and Frigate NVR (camera control and recording) with local storage, local control, and no cloud component.

The hardware we're using for prototyping are off-lease Dell 7050 Micros running Proxmox, with 500gb Crucial MX500 ssds and an NVME Coral TPU that Frigate uses for object detection, which reduces CPU usage. 500gb is enough, because Frigate can be set to auto delete recorded clips after a set period of time, and clips can easily be saved.

Frigate can be installed via docker or as an add-on to Home Assistant. If you want to use Home Assistant, you can install Home Assistant OS directly on the SSD via these instructions.

We're using Amcrest WiFi cameras (IP4M-1041B) that connect to an on-board WiFi network controlled by an OpenWRT VM that uses the WiFi card in the system (not the ones that come with the Dells). Everything on our systems is locked down by an Opnsense firewall vm, so it should be safe to use even in an existing unsecured network.

Personally, for my own system, I've been running 4 Amcrest ethernet turret cameras (IP5M-T1179EW) for about 4 years now with no problems. You just need a cheap PoE switch (mine was $20) and then run some cables.

To use Frigate, the cameras must support both ONVIF and RTSP. Pro tip: the Amcrest Smart Home line of cameras won't work - you need a camera with a built-in web server for direct configuration.

For remote access, you could set up Wireguard (via an official Home Assistant add-on), or you could pay Nabu Casa (Home Assistant's parent company) $65/year (or 75 EUR), enter your credentials in the Home Assistant app and you're good to go, while helping fund future Home Assistant development.

[–] loudWaterEnjoyer@lemmy.dbzer0.com 15 points 1 month ago (2 children)

Kudos to the guy sharing his expertise for free while working on something similar they're trying to profit from

[–] TrenchcoatFullofBats@belfry.rip 9 points 1 month ago (1 children)

Thanks! Since our entire software stack is open source, and since open source software has been so transformative for our lives in general, it's a priority for us to give back where we can.

The profit will come from labor involved in assembling the hardware, pre-configuring the software for each customer, and providing personalized support via a set of subscription support plans at various prices, including individual one-offs.

We'll be dedicating a set amount of time every day to read support forums for the software we use (and places like Lemmy) and provide help where we can.

load more comments (1 replies)
[–] MvPts@lemmy.world 4 points 1 month ago

Very refreshing to see.

[–] fmstrat@lemmy.nowsci.com 4 points 1 month ago (2 children)

You are my kind of admin, so, any suggestions on hardware that use starlight sensors? Or anything comparable in low light with color?

load more comments (2 replies)
[–] Sati@lemm.ee 4 points 1 month ago* (last edited 1 month ago) (1 children)

What is the name or your project? I'm interested in being a customer. When do you hope to have the first product released?

[–] TrenchcoatFullofBats@belfry.rip 2 points 1 month ago (3 children)

We are not quite ready to roll everything out yet -it'll probably be another 2 or 3 months, but I'd be happy to shoot you a message when we go live if you'd like.

[–] Sati@lemm.ee 3 points 1 month ago (1 children)

Yes please, add me to your waiting list

load more comments (1 replies)
[–] wreckedcarzz@lemmy.world 2 points 1 month ago (1 children)

I'm interested as well - family members have been looking for a while, and they keep finding products that I deem as... low-quality, for one reason or another, and my requirements are basically aligned with what you are building.

Please let me know when your solution goes live :D

load more comments (1 replies)
[–] Kaliax@lemmy.world 2 points 1 month ago (1 children)

I'd appreciate a message when you go live! People like you are amazing.

[–] TrenchcoatFullofBats@belfry.rip 2 points 1 month ago

Will do! And thanks, that means a lot!

[–] dsilverz@thelemmy.club 31 points 1 month ago (2 children)

If you consider alternatives beyond out-of-the-shelf, I'd recommend your own DIY IP camera. A Raspberry Pi (or something similar, such as Orange Pi), an IR camera module, an UPS and a protective shell case are the minimal hardware requirements for a cheap camera built by yourself. You'll have total control over the software, you'll be allowed to choose the OS, the software, every aspect of the camera, something that's not possible with out-of-the-shelf IP cameras.

[–] IchNichtenLichten@lemmy.world 10 points 1 month ago (1 children)

I've had four cameras running for a few years, streaming over RTSP and powered over ethernet. Works well!

[–] ShareMySims@sh.itjust.works 11 points 1 month ago (2 children)

Is this something a complete novice could do, with reasonable effort and cost? If so would you be able to eli5, or point me in the direction of somewhere that does?

Ideally, for my current situation anyway, I'd like to set up a camera indoors by a window (with IR switched off and a proper mount) and be able to see what it sees from a device (phone pc or even dedicated pad if it helps with security) in the other room, and if it can also record and save the video locally for me to be able to access from the remote device, that'd be good too. Privacy and security of the data are top priority.

Every time I start looking in to it my brain gets completely overwhelmed by options and information and scrambles, and I have to back away 😑 I'd love for there to be a way to set this up that was near as straightforward as the privacy abusing options..

[–] ByteOnBikes@slrpnk.net 9 points 1 month ago* (last edited 1 month ago) (1 children)

I self-host and dabble with this stuff. Im an engineer for more than a decade.

But I really struggled to find a solution that has a really high uptime with minimal maintenance. Ive set up some raspberry pi projects, including cams. Why would I want video to transfer to some company?

But the trade offs were significant. Every few weeks, there was a new problem. Maybe my router. Maybe my internet. Maybe the Pi. Maybe something else. Maybe it's my VPN when I'm trying to dial into the network. Maybe it's my phone app no longer seeing the device. Maybe a update broke it. Maybe God hated me that day.

After six months and spending 2-3 hours a month maintaining it, I burned out and just bought an off-the-shelf solution with a mobile app.

Of course, I only use it for security and it doesn't exist in the house. It grosses me out, but it's been two years of plug-and-play and just working without setup.

[–] Benjaben@lemmy.world 3 points 1 month ago (2 children)

Argh, this is exactly the scenario that I've anticipated and has kept me away from similar (home automation as well).

That's what I want, high reliability, local only storage, remote view of some kind, and minimal (ongoing) fuss. Sounds like you did not quite land on that if the thing you bought grosses you out? Or do you mean something different?

load more comments (2 replies)
[–] IchNichtenLichten@lemmy.world 5 points 1 month ago* (last edited 1 month ago) (1 children)

It's not too difficult, I figured it out and I eat crayons.

Here's the software I use but there are other options: https://github.com/BreeeZe/rpos - That runs on the camera Pi and provides the video stream.

I use a Pi, a camera module like this https://www.raspberrypi.com/products/raspberry-pi-high-quality-camera/ and a suitable lens. You can get cheaper camera modules, IR modules, etc.

Also, something like this to power it: https://www.tp-link.com/us/business-networking/omada-switch-unmanaged/ds105gp/ You could just use a regular switch and power the Pi with a power adapter if that works better. My cameras are all ceiling mounted so having one cable for data and power made sense for me.

I use this to split the ethernet into power and data when it reaches the Pi: https://www.amazon.com/UCTRONICS-PoE-Splitter-USB-C-Compliant/dp/B087F4QCTR/ref=pd_lpo_d_sccl_2/130-2310467-3870744?pd_rd_w=l0O0u&content-id=amzn1.sym.4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_p=4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_r=TNA6SF008RVJ5A1Y5V97&pd_rd_wg=4ITEg&pd_rd_r=e6c424de-42a7-4d27-974f-3f129d2bdd02&pd_rd_i=B087F4QCTR&th=1

Then I have this running on a Linux VM to collect the camera feeds and display them in a web browser: https://github.com/motioneye-project/motioneye

You'll also need a case, my solution was to buy a metal Pi case and mount the module onto that, feeding the ribbon cable back into the case.

If you decide to go ahead and need help, just ask.

[–] ShareMySims@sh.itjust.works 5 points 1 month ago (5 children)

Oh wow, thanks so much for all the info, I really appreciate it! I'm bookmarking you reply and all the links, but it's a bit much for me to process right now lol (I saw your comment about pretty much what I want to set up and just had to ask, fully meaning to get in to it, but it's been a long morning and my brain is now mush)

Just to give you an idea, I've never set up or even used a Pi or used Linux, I've done very basic pc building and troubleshooting, but have no programming knowledge, so when I said novice I meant it 😂 I'm mostly good at following directions as long as they're clear. Are there any manuals that would tell me how to put all the different parts you mentioned together?

[–] Benjaben@lemmy.world 2 points 1 month ago* (last edited 1 month ago) (1 children)

Just throwing this out there, but the problem you're describing sounds like a good fit for an LLM I've been using for similar purposes, Claude.

I've found it to be really good at helping me slog through what would be a burdensome and wasteful amount of reading, in order to answer specific questions OR to get a baseline understanding of a thing.

It's a bit hard to know how much value comes from my engineering background and my tendency to "know what I don't know" and thereby ask focused questions, but it's definitely worth a shot. I have found it to be surprisingly sophisticated and much better than slogging through the wasteland of bad search results + too much unrelated but real info.

A topic like this where there's a tremendous amount of legit docs, articles, and forum activity - it's really the exact use case where it's very difficult for a human, and very easy for an LLM to effectively digest that info.

Some caveats I've noticed:

  • it sometimes is overly agreeable / "friendly" when it should be more direct
  • it does sometimes hallucinate or say BS with casual confidence, which sucks because the more you need the info the less well you can spot that. It hasn't hampered usefulness too much for me, but then again I'm usually able to spot the mistakes even in ~unfamiliar subjects
  • they've moved the free tier back to a less capable model at the moment...most of my good experiences are with Claude 3.5 Sonnet, but Claude 3 Haiku (present free tier) is still good

If you're really curious but the volume of reading and documentation to get started is presenting a big barrier, try using Claude to see how quickly you might be able to clear that obstacle. It's been removing those exact barriers for me very effectively lately.

Edit to add: a particularly useful way I can imagine folks in your shoes using this - as a "companion" while you try to follow a guide in an article somewhere. It can answer questions about terms you don't understand, even reasoning behind doing certain steps or what to do if it goes wrong. In fact, you could almost certainly just feed it the written procedure itself (telling it that you're doing so) and really get it to reason about the process with you. Just help get you through whatever implementation.

[–] ShareMySims@sh.itjust.works 3 points 1 month ago (1 children)

I genuinely appreciate you taking the time to make this comment, thanks.

I do see how this can be helpful for a lot of things, but I think in my situation (namely a bunch of neurodiversity and brain fog, and no existing interest in or experience with LLMs), having to learn how to deal with an LLM to a point where I get results I'd be confident enough in to trust without having to double or triple check, is probably a bigger hurdle than just diving in to figuring out security camera set ups. It's putting one more thing in the way of the information I actually need, which means my brain is much much less motivated than it already is to get the information, if you see what I mean..

[–] Benjaben@lemmy.world 2 points 1 month ago (1 children)

I do understand what you mean, but I think you're probably significantly overestimating the difficulty of using the tool. One of its major strengths is its ability to just understand you, like you'd talk to anyone human, with the benefit that you can even instruct it to use a style you prefer. Just say "I'd like your answer to be terse, let's see if we're on the right track before getting into details". Just as an example.

With all that said you know what you want and need better than anyone else, that's all I've got to say on it, cheers!

[–] ShareMySims@sh.itjust.works 2 points 1 month ago

Thanks again 👍

load more comments (4 replies)
[–] Evil_Shrubbery@lemm.ee 6 points 1 month ago* (last edited 1 month ago)

Yes, this.

And prob not what op is looking for but I also have a bunch of esp32 cams, different PCBs and with different sensors/lenses.

They ain't much but also cost like 3 monies with shipping (and is enough to eg normally recognise people etc).

[–] abominable_panda@lemmy.world 14 points 1 month ago* (last edited 1 month ago) (1 children)

I use cheap and cheerful cameras with Ingenic SOCs and flash an open source firmware thingino on them.

List of supported cameras increases fairly rapidly

load more comments (1 replies)
[–] nomous@lemmy.world 13 points 1 month ago (1 children)

Axis makes good (the best) IP cams, I use them commercially, they're pretty much the gold standard. Super fucking expensive though so probably not worth it for home use but you might be able to pick up something 2nd hand.

[–] Thorry84@feddit.nl 7 points 1 month ago (1 children)

I've had great experience with Axis in the past. However in the past they used to have planned obsolescence where the flash they used had a very limited number of write cycles. With the Linux based OS they run it writes to the flash all the time. This would cause the thing to start dropping writes and misbehave. When ran 24/7 they usually died after about 4 years. The place I worked at just threw them away and replaced them whenever that happened, to not have downtime for cameras. Once I asked if I could have a couple to diagnose the fault and I found out the flash was out of write cycles on all of them. Maybe they are better nowadays, but it was pretty fucked up to see such expensive cameras be destroyed because of a few cents of flash.

load more comments (1 replies)
[–] Blue_Morpho@lemmy.world 9 points 1 month ago (2 children)

Anything that supports ONVIF. I like Hikvision for their quality, price, and web interface for setup. But don't trust any IP camera. Make sure the Mac and or IP address is blocked at your router.

There are different night visions to pick from. There's ir night vision and white led lit night vision. I prefer ir night vision because I don't want visible led lights on all night. You get a better picture at night although its black and white.

However many color night vision cameras do really well without any light source at all. I tried both and it's more of a preference so I can't say which one will work for you.

[–] corsicanguppy@lemmy.ca 11 points 1 month ago (2 children)

Reconsider hikvision: they were recently dropped as an option for many organizations due to some new data leak, and removed from gov buildings in a number of countries.

[–] kata1yst@sh.itjust.works 7 points 1 month ago

And that's why you don't let them contact the Internet.

Managing IoT risk is an easy no brainer if people bother to try.

load more comments (1 replies)
[–] WhyJiffie@sh.itjust.works 3 points 1 month ago (1 children)

you shouldn't block them by MAC. you should put them on a VLAN dedicated to cams, with no route to the internet. only computer connected to it is your NVR

load more comments (1 replies)
[–] Illecors@lemmy.cafe 8 points 1 month ago (1 children)

I only have the indoor one, but Reolink is fine. Used it as a baby cam. No cloud bs, supports an rtsp stream. App has gone downhill, but due to rtsp I sort of don't care.

[–] wreckedcarzz@lemmy.world 3 points 1 month ago* (last edited 1 month ago)

Similar product, different experience: I tried their doorbell and found it to be way underpowered once I turned on ONVIF. Huge, expanding lag between real world and camera feed. 20fps max is very oof too, even if you are going to use their protocol and software. And it doesn't work with physical chime boxes, so you have to use their plug-in chime or botch a converter together yourself.

Was really excited (trying to replace a nest doorbell) and then so, so disappointed once I got it. Their other cams might be fine but oof, the experience put me off.

[–] ComradeMiao@lemmy.world 6 points 1 month ago

I use amcrest with my nas

[–] JiveTurkey@lemmy.world 6 points 1 month ago (1 children)

I've used a ton of ubiquity unifi cameras and they have a solid range on pricing. I think you need the unifi software to commission them though. For what it's worth they don't use the cloud for storage and don't require any sort of subscription.

[–] Blue_Morpho@lemmy.world 18 points 1 month ago (4 children)

Ubiquity is the definition of vendor lock in.

[–] JiveTurkey@lemmy.world 5 points 1 month ago (6 children)

Right. I only mentioned them because they don't require a sub and you can store everything locally.

load more comments (6 replies)
load more comments (3 replies)
[–] carl_dungeon@lemmy.world 5 points 1 month ago

I have reolink and use them with my NAS. Been happy with them!

[–] Player2@lemm.ee 5 points 1 month ago

Dahua makes good stuff. Their products are commonly sold under different generic brand names too, but they're all good

[–] Buelldozer@lemmy.today 4 points 1 month ago

Another vote for Reolink, especially the models with ONVIF support.

[–] RobotToaster@mander.xyz 4 points 1 month ago (1 children)

I've been looking for the same thing, everything usually points to frigate being the answer, but it seems like a bit of work to get everything set up.

load more comments (1 replies)
[–] cm0002@lemmy.world 3 points 1 month ago* (last edited 1 month ago)

Probably look to secondhand commercial stuff, anything with ONVIF support should be fine.

Picked up some domed outdoor Cisco IP6630s awhile back off eBay for cheap and while not the best image wise they're built like tanks AND they give you full root access lol

[–] ThePantser@lemmy.world 3 points 1 month ago* (last edited 1 month ago) (1 children)

All my cameras are reolink. I have their duo2 which is super wide so it captures everything, I use the doorbells and have the 360 camera in my garage. They all work with frigate and blue iris.

[–] bravesilvernest@lemmy.ml 2 points 1 month ago

I have this, and then block internet access at the router level. The app still works if on the internal network or wireguard vpn

[–] neidu3@sh.itjust.works 2 points 1 month ago* (last edited 1 month ago)

Axis have some really good ones. Most of them support RTSP, and many have PTZ as a bonus.

Source: I've installed a lot of them onboard ships. Axis and Samsung are the ones that handle the environment best.

load more comments