this post was submitted on 31 Mar 2024
62 points (81.6% liked)
Memes
45646 readers
1076 users here now
Rules:
- Be civil and nice.
- Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
It's easier for handling real things.
Try doing woodwork in feet and inches for a day. Try it in metric for a day. You'll see what I mean.
It was crafted for the human-scale, whereas metric was worked out on paper by French philosophers.
Dude, WTF are you talking about? When I was a machinist it was so much easier to deal with metric. 1 inch ~ 25 mm, from there it is just way easier to deal with measurements such as 27.5 mm instead of 1 5/64 inches and all of these inverse powers of 2. I was always jealous of the French machinist I worked with talking about how the only units you should ever have to work with is meters and millimeters. If you are concerned about "Human Scale" then intuitively a meter and a yard are close enough for estimates and you don't have to deal with "wait, what is 5/8 + 3/16 + 1 7/64?"
Those are so easily commensurable! It's 1 and 59/64 obv.
It's set up to make this easy.
Let me ask: do you think people have usedit for hundreds of years for no reason?
Let me ask you something in return: do you think you can't use fractions with metric? If you prefer fractions, that's fine, but you haven't justified why it's better to use a system of measurement based on vibes.
1/4" = 0.25" 1/4mm = 0.25mm