Air is better than water
this post was submitted on 20 Nov 2023
543 points (93.6% liked)
Memes
45646 readers
1114 users here now
Rules:
- Be civil and nice.
- Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Eh, how does it suck compared to air cooling? I mean, yeah it’s expensive and requires more maintenance, but it’s way quieter and keeps the components cooler than air cooling.
E: a lot of people who are saying all the stuff that could go wrong sound like they’ve never built a WC system and refuse to acknowledge that many of these issues are likely operator/installer error. Installation absolutely does require more care and effort than an air cooled system. I’m not trying to suggest anyone WC or that it’s better than air, you do you, I don’t care, but WC is trouble free if done correctly with good components.
It has more points of failure, and that failure can be more catastrophic. If your air cooler falls off somehow or the fan dies, CPUs these days are pretty good about shutting themselves off before they melt. If your fittings leak, it can destroy everything.
That’s certainly a risk one takes. FWIW I built mine with custom hard lines and fittings, and after the initial shakedown test, have had zero leaks in 6 years. YMMV, I guess.
you can destroy your graphics card before even putting it in the system when you fuck up the installation of your block? your system can leak and everything dies because of a short? one cirtical component in your loop dies (like the pump) and all of the work starts over again? it doesnt suck, but if youre not into this whole builiding thing, it sucks compared to aircooling because you have almost no advantage beside temps and noise, even those can be worse if you dont know what youre doing. it doesnt suck as a whole thing, but compared to aircooling its not worth the money, the work or even the flex of you dont enjoy the process of putting it together!
I sincerely doubt this as some sort of random or unknown issue. It uses the exact same attach points as a stock cooler or even a good aftermarket cooler. None of those warp the mobo or gpu. Keeping the temperature extremes down should prevent warping, if anything. I’ve been through two WC motherboards and 3 gpus and have experienced zero warping.
The only thing I can offer is either the boards that do warp are cheaply made and unable to support the weight of a good waterblock or the installer is over-enthusiastic about securing it and does so too tightly and thereby causes the damage. My current waterblock has specific instructions regarding installation to prevent over-tightening and damage to the motherboard and components. IOW I suggest it’s an installer problem the vast majority of the time.