this post was submitted on 04 Apr 2024
1113 points (98.1% liked)
Programmer Humor
19551 readers
736 users here now
Welcome to Programmer Humor!
This is a place where you can post jokes, memes, humor, etc. related to programming!
For sharing awful code theres also Programming Horror.
Rules
- Keep content in english
- No advertisements
- Posts must be related to programming or programmer topics
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
That's pretty cool, might actually do that. Tho, we currently don't use the history as much anyways, we're just having a couple of small student projects with the biggest group being 6 people. I guess it's more useful if you're actually making a real product in a huge project that has a large team behind it
Just remember to not combine it with force push or you're in for some chaos (rewriting history team members have already fetched is a big no-no).
Facts. Force push belongs in Star Wars, and nowhere else.
Or, you know, on your own feature branch to clean up your own commits. It's much, much better than constantly littering your branch's history with useless merge commits from upstream, and it lets you craft a high-quality, logical commit history.
Of course it has its uses. I didn't mention them because the guy just learned about rebase - it's unlikely to be applied flawlessly from the start.
I was replying to the other comment, not yours. Though there's not really a way of using rebasing without force pushing unless it's a no-op.
Rebasing is really not a big deal. It's not actually hard to go back to where you were, especially if you're using
git rebase --interactive. For whatever reason people don't seem to get that commits aren't actually ever lost and it's not that hard to point HEAD back to some previous commit.I know. Answered anyway because I thought of the same thing as you.
I like to rebase after fetching and before pushing. IMO that's the most sensible way to use it even in teams that generally prefer merge. It's also not obvious to beginners since pull is defaulted to fetch+merge.
Ah gotcha.
What do you mean? Like not pushing at all until you're making the MR? Because if the branch has ever been pushed before and you rebase, you're gonna need to force push the branch to update it.
Personally I'm constantly rebasing (like many times a day) because I maintain a clean commit history as I develop (small changes to things I did previously get commits and are added to the relevant commit as a fixup during interactive rebasing). I also generally keep a draft MR up with my most recent work (pushing at end of day) so that I can have colleagues take a look at any point if I want to validate anything about the direction I'm taking before continuing further (and so CI can produce various artifacts for me).
Yeah, pull should definitely be
--ff-onlyby default and it's very unfortunate it isn't. Merging on pull is kind of insane behavior that no one actually wants.Not everyone works in large orgs that require pull requests. We have a dev branch multiple devs push to and just branch off for test phase. So I commit locally (also interactive rebasing when fixing stuff from earlier). When I'm ready to push, I fetch, rebase and push. I never force push here.
Uh, it's definitely a bad idea to be concurrently developing on the same branch for a lot of reasons, large org or not. That's widely considered a bad practice and is just a recipe for trouble. My org isn't that huge, and on our team for our repo we have 9 developers working on it including myself. We still do MRs because that's the industry standard best practice and sidesteps a lot of issues.
Like, how do you even do reviews? Patch files?
You can do all that without force push. Just make a new branch and do the cleanup before the first push there. Allowing force push just invites disaster from junior developers who don't know what they're doing. If you want to clean up after them, that's your business, I guess.
That's exactly the same thing. A branch is nothing more than a commit that you've given a name to. Whether that name is your original branch's name or a new branch's name is irrelevant. The commit would be the same either way.
A junior cannot actually do any real damage or cause any actual issue. Even if they force push "over" previous work (which again, is just pointing their branch to a new commit that doesn't include the previous work),, that work is not lost and it's trivial to point their branch to the good commit they had previously. It's also a good learning opportunity. The only time you actually can lose work is if you throw away uncommitted changes, but force pushing or not is completely irrelevant for that.
Force pushes are perfectly safe if you're working on your own branch, and even if you're sharing a branch, you can still force push to it as long as you inform and coordinate with whoever else is working on that branch.
I wouldn't recommend it. The Git documentation itself doesn't recommend rebase for more than moving a few unpushed commits to the front of a branch you are updating. Using it by default instead of merge requires you to use --force-push as part of your workflow which can lead to confusing situations when multiple developers end up commiting to the same branch, and at worst can lead to catastrophic data loss. The only benefit is a cleaner history graph, which is rarely used anyway, and you can always make the history graph easier to read with a gui without incuring any of the problems of rebase.
Bad take IMO,
At 10+ YOE, I use rebase almost exclusively. Branch from main, rebase to clean up commit history before putting up a PR. If commits are curated properly you don't run into conflicts very often. Branches really shouldn't be shared too often anyway, and the ones that are should be write protected.
Catastrophic data loss isn't really possible either with git since it's all preserved and you can
git reflogeven if you mess up.The meme is right. Git good
When rebasing, it applies the changes without the commit history?
Does that mean that when you fast forward your main/dev branch and commit, you then add a single commit that encompasses every changes that were rebase?
No, there are no fast-forwards with rebasing. A rebase will take take the diff of each commit on your feature branch that has diverged from master and apply those each in turn, creating new commits for each one. The end result is that you have a linear history as though you had branched from master and made your commits just now.
If you had branched like this:
It would like this after merging master into your feature branch:
And it would like this if you instead rebased your feature branch onto master:
This is why it's called a "rebase": the current state of master becomes the starting point or "base" for all of your subsequent commits. Assuming no conflicts, the diff between
AandDis the same as the diff betweenAandD'.Years of experience don't really matter here, that's just call to authority, in this case yourself. You might as well be the worst git user ever after 20 years of usage, or the best after 2. We don't know that.
Anyway, what you're saying basically requires a perfect world to be true. Feature branch flow is perfectly fine, but you do end up with merge conflicts constantly, unless you have cordoned off areas of the repo for certain users. Two people working on unrelated features, both change a signature of some helper/util method, merge conflict. Nothing serious, can be fixed in a minute, and rebasing or merging won't help for either.
Merge is perfectly fine. And arguing about which strategy to use is one of those autistic debates we as an industry seemingly love to have. It doesn't matter, but you'll find people screaming at each other about it. See Emacs vs. Vi. Same crap.
Merge is fine, but not knowing both rebase and merge is dumb. And I guess I've been in a perfect world this whole time in huge technical orgs lol.
This a really bad take and fundamentally misunderstands rebasing.
First off, developers should never be committing to the same branch. Each developer maintains their own branch. Work that needs to be tested together before merging to master belongs on a dedicated integration branch that each developer merges their respective features branches into. This is pretty standard stuff.
You don't use rebasing on shared branches, and no one arguing for rebasing is suggesting you do that. The only exception might be perhaps a dedicated release manager preparing a release or a merge of a long-running shared branch. But that is the kind of thing that's communicated and coordinated.
Rebasing is for a single developer working on a feature branch to produce a clean history of their own changes. Rebasing in this fashion doesn't touch any commits other than the author's. The purpose is to craft a high quality history that walks a reader through a proposed sequence of logical, coherent changes.
Contrary to your claim, a clean history is incredibly valuable. There's many tools in git that benefit significantly from clean, well-organizes commits.
git bisect,git cherry-pick... Pretty much any command that wants to pluck commits from history for some reason. Or even stuff likegit log -Lorgit blameare far more useful when the commit referenced is not some giant amalgamation of changes from all over the place.When working on a feature branch, if you're merging upstream into your branch, you're littering your history with pointless, noisy commits and making your MR harder to review, in addition to making your project's history harder to understand and navigate.
1000 times this