tubbadu

Hello! I set up jellyfin+sonarr+radarr+prowlarr+qbittorrent in my home server, and it all works well. the only problem is that I'm storing my files on a usb HDD with exFAT filesystem, and it does not support (AFAIK) hardlinks. due to this, sonarr/radarr are copying the files from the download folder (on the internal SSD with xfs) to the USB HDD.

1. do I understand correctly what's going on? XD
2. what is your setup or what do you suggest to do to avoid this? Ideally, I would like to download the files on the internal SSD and then move the files to the external HDD, and then hardlink it into the download folder to keep seeding it. If this is not possible, it would also be a good solution to download directly inside the USB drive, and then hardlink it into the jellyfin library.

any tip is greatly welcome! thank in advance fellow pirates!

Hello fellow selfhosters! I changed my server OS from fedora server to alma linux as I wanted a more stable base with less frequent updates for my docker containers, so I backed everything up and installed almalinux. It all went smoothly, and now all the containers seem to work as before except for nginx proxy manager: on fedora, I set all the proxy hosts like this (using jellyfin for instance): jellyfin.mydomain.duckdns.org > http://myserverhostname:8096 now, for some strange reasons, it does not work anymore, and I get a bad gateway error. I tried with and without SSL (that I had from the previous installation, do I need to regenerate them? but without it should work anyway...), pointing to localhost:8096, to myserverhostname:8096, to jellyfin:8096, but nothing. The only way I could make it work was with the resolved IP address of my server:

# host myserverhostname
myserverhostname.station has address 192.168.1.13

pointing nginx to 192.168.1.13:8096 correctly shows the website. why does this happens? am I doing something wrong?

EDIT: the only one that's working with localhost is nginx itself (http://localhost:81)

======

SOLUTION: instead of myserverhostname, in nginx proxy host configuration (in the gui) I had to set myserverhostname.station to get it working. I don't know why, in the previous installation only the hostname was enough...

Do I need to click on the X here? it says "Are you sure you want to delete the root folder '/downloads'?" so I'm a bit scared, it will not remove the actual folder and its content right?

Edit: I created a dummy folder and added and removed it and no file were touched! Thanks to everyone!

it says "Remember that it's not possible to play films on GNU/Linux, but only on other compatible devices"... ahh what a wild world we live in

Hello! I recently set up my first home server, and would like to set up qbittorrent on it. I tried using protonVPN, which is what I use on desktop, but got rate limited because torrenting on the free plan is not allowed. What do you think of hide.me vpn? it has a CLI linux version, I think I can install it inside the docker container and set up a killswitch (that should be built in? at least that's what they say) to torrent safely.

I know paid VPNs are better and also pretty cheap, but I cannot afford one right now. Any tips?

Hello! I'm trying to set up qbittorrent and gluetun using docker compose on my home server, using the free account of ProtonVPN.

on some posts I see that ports 8080, 6881 and 6881/UDP are open in gluetun. in the guide I followed instead only port 8080 is exposed. So I exposed port 8080 and it is not working. I launched the torrent of endeavourOS iso image (that my laptop (with the same vpn) downloads in a few minutes with plenty of peers and seeds at about 4Mb/s), and it downloaded at an EXTREME low speed (a few B/s) for a few seconds, and then got stuck at stalled. When it is stalled, the qbittorrent container has no internet access (ping linux.org fails).

So my questions are:

1. Which ports do I need to open on gluetun? if I open 6881 wouldn't my IP be exposed bypassing gluetun?
2. What's wrong with my setup? Why is internet connection so slow when there is, and why does it go away so often?
3. Is this configuration secure? in case of gluetun fail, would my IP be leaked?

here's the two docker-compose.yml files:

version: "3"

services:
    gluetun:
        image: qmcgaw/gluetun
        container_name: gluetun
        cap_add:
            - NET_ADMIN
        environment:
            - VPN_SERVICE_PROVIDER=protonvpn
            - OPENVPN_USER=MYUSERHERE
            - OPENVPN_PASSWORD=MYPASSWORDHERE
            - SERVER_COUNTRIES=Netherlands
            - FREE_ONLY=on
        volumes:
            - ~/docker/gluetun/gluetun:/gluetun
        ports:
            - 8080:8080 # qBittorrent
        restart: unless-stopped

and

version: "3"
services:
  qbittorrent:
    image: linuxserver/qbittorrent:latest
    container_name: qbittorrent
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=Europe/Rome
      - WEBUI_PORT=8080
    volumes:
      - ~/docker/qbittorrent/config:/config
      - ~/docker/qbittorrent/downloads:/downloads
    network_mode: "container:gluetun"
    #ports:
    #  - 8080:8080
    #  - 6881:6881
    #  - 6881:6881/udp
    restart: unless-stopped

and here's some logs:

024-01-22T19:07:15Z INFO Settings summary:
├── VPN settings:
|   ├── VPN provider settings:
|   |   ├── Name: protonvpn
|   |   └── Server selection settings:
|   |       ├── VPN type: openvpn
|   |       ├── Countries: netherlands
|   |       ├── Free only servers: yes
|   |       └── OpenVPN server selection settings:
|   |           └── Protocol: UDP
|   └── OpenVPN settings:
|       ├── OpenVPN version: 2.5
|       ├── User: [set]
|       ├── Password: fL...BK
|       ├── Network interface: tun0
|       ├── Run OpenVPN as: root
|       └── Verbosity level: 1
├── DNS settings:
|   ├── Keep existing nameserver(s): no
|   ├── DNS server address to use: 127.0.0.1
|   └── DNS over TLS settings:
|       ├── Enabled: yes
|       ├── Update period: every 24h0m0s
|       ├── Unbound settings:
|       |   ├── Authoritative servers:
|       |   |   └── cloudflare
|       |   ├── Caching: yes
|       |   ├── IPv6: no
|       |   ├── Verbosity level: 1
|       |   ├── Verbosity details level: 0
|       |   ├── Validation log level: 0
|       |   ├── System user: root
|       |   └── Allowed networks:
|       |       ├── 0.0.0.0/0
|       |       └── ::/0
|       └── DNS filtering settings:
|           ├── Block malicious: yes
|           ├── Block ads: no
|           ├── Block surveillance: no
|           └── Blocked IP networks:
|               ├── 127.0.0.1/8
|               ├── 10.0.0.0/8
|               ├── 172.16.0.0/12
|               ├── 192.168.0.0/16
|               ├── 169.254.0.0/16
|               ├── ::1/128
|               ├── fc00::/7
|               ├── fe80::/10
|               ├── ::ffff:127.0.0.1/104
|               ├── ::ffff:10.0.0.0/104
|               ├── ::ffff:169.254.0.0/112
|               ├── ::ffff:172.16.0.0/108
|               └── ::ffff:192.168.0.0/112
├── Firewall settings:
|   └── Enabled: yes
├── Log settings:
|   └── Log level: INFO
├── Health settings:
|   ├── Server listening address: 127.0.0.1:9999
|   ├── Target address: cloudflare.com:443
|   ├── Duration to wait after success: 5s
|   ├── Read header timeout: 100ms
|   ├── Read timeout: 500ms
|   └── VPN wait durations:
|       ├── Initial duration: 6s
|       └── Additional duration: 5s
├── Shadowsocks server settings:
|   └── Enabled: no
├── HTTP proxy settings:
|   └── Enabled: no
├── Control server settings:
|   ├── Listening address: :8000
|   └── Logging: yes
├── OS Alpine settings:
|   ├── Process UID: 1000
|   └── Process GID: 1000
├── Public IP settings:
|   ├── Fetching: every 12h0m0s
|   └── IP file path: /tmp/gluetun/ip
└── Version settings:
└── Enabled: yes
2024-01-22T19:07:15Z INFO [routing] default route found: interface eth0, gateway 172.29.0.1, assigned IP 172.29.0.2 and family v4
2024-01-22T19:07:15Z INFO [routing] adding route for 0.0.0.0/0
2024-01-22T19:07:15Z INFO [firewall] setting allowed subnets...
2024-01-22T19:07:15Z INFO [routing] default route found: interface eth0, gateway 172.29.0.1, assigned IP 172.29.0.2 and family v4
2024-01-22T19:07:15Z INFO TUN device is not available: open /dev/net/tun: no such file or directory; creating it...
2024-01-22T19:07:15Z INFO [dns] using plaintext DNS at address 1.1.1.1
2024-01-22T19:07:15Z INFO [http server] http server listening on [::]:8000
2024-01-22T19:07:15Z INFO [healthcheck] listening on 127.0.0.1:9999
2024-01-22T19:07:15Z INFO [firewall] allowing VPN connection...
2024-01-22T19:07:15Z INFO [openvpn] OpenVPN 2.5.8 x86_64-alpine-linux-musl [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Nov  2 2022
2024-01-22T19:07:15Z INFO [openvpn] library versions: OpenSSL 3.1.4 24 Oct 2023, LZO 2.10
2024-01-22T19:07:15Z INFO [openvpn] TCP/UDP: Preserving recently used remote address: [AF_INET]192.40.57.231:1194
2024-01-22T19:07:15Z INFO [openvpn] UDP link local: (not bound)
2024-01-22T19:07:15Z INFO [openvpn] UDP link remote: [AF_INET]192.40.57.231:1194
2024-01-22T19:07:21Z INFO [healthcheck] program has been unhealthy for 6s: restarting VPN (see https://github.com/qdm12/gluetun-wiki/blob/main/faq/healthcheck.md)
2024-01-22T19:07:21Z INFO [vpn] stopping
2024-01-22T19:07:21Z INFO [vpn] starting
2024-01-22T19:07:21Z INFO [firewall] allowing VPN connection...
2024-01-22T19:07:21Z INFO [openvpn] OpenVPN 2.5.8 x86_64-alpine-linux-musl [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Nov  2 2022
2024-01-22T19:07:21Z INFO [openvpn] library versions: OpenSSL 3.1.4 24 Oct 2023, LZO 2.10
2024-01-22T19:07:21Z INFO [openvpn] TCP/UDP: Preserving recently used remote address: [AF_INET]185.107.56.235:1194
2024-01-22T19:07:21Z INFO [openvpn] UDP link local: (not bound)
2024-01-22T19:07:21Z INFO [openvpn] UDP link remote: [AF_INET]185.107.56.235:1194
2024-01-22T19:07:22Z WARN [openvpn] 'link-mtu' is used inconsistently, local='link-mtu 1633', remote='link-mtu 1634'
2024-01-22T19:07:22Z WARN [openvpn] 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1500'
2024-01-22T19:07:22Z WARN [openvpn] 'comp-lzo' is present in remote config but missing in local config, remote='comp-lzo'
2024-01-22T19:07:22Z INFO [openvpn] [node-nl-164.protonvpn.net] Peer Connection Initiated with [AF_INET]185.107.56.235:1194
2024-01-22T19:07:23Z INFO [openvpn] setsockopt TCP_NODELAY=1 failed
2024-01-22T19:07:23Z INFO [openvpn] TUN/TAP device tun0 opened
2024-01-22T19:07:23Z INFO [openvpn] /sbin/ip link set dev tun0 up mtu 1500
2024-01-22T19:07:23Z INFO [openvpn] /sbin/ip link set dev tun0 up
2024-01-22T19:07:23Z INFO [openvpn] /sbin/ip addr add dev tun0 10.25.0.5/16
2024-01-22T19:07:23Z INFO [openvpn] UID set to nonrootuser
2024-01-22T19:07:23Z INFO [openvpn] Initialization Sequence Completed
2024-01-22T19:07:23Z INFO [dns] downloading DNS over TLS cryptographic files
2024-01-22T19:07:24Z INFO [healthcheck] healthy!
2024-01-22T19:07:24Z INFO [dns] downloading hostnames and IP block lists
2024-01-22T19:07:32Z INFO [healthcheck] unhealthy: dialing: dial tcp4: lookup cloudflare.com: i/o timeout
2024-01-22T19:07:32Z INFO [dns] init module 0: validator
2024-01-22T19:07:32Z INFO [dns] init module 1: iterator
2024-01-22T19:07:32Z INFO [dns] start of service (unbound 1.17.1).
2024-01-22T19:07:33Z INFO [dns] generate keytag query _ta-4a5c-4f66. NULL IN
2024-01-22T19:07:33Z INFO [healthcheck] healthy!
2024-01-22T19:07:33Z INFO [dns] ready
2024-01-22T19:07:33Z INFO [vpn] You are running on the bleeding edge of latest!
2024-01-22T19:07:33Z INFO [ip getter] Public IP address is 185.107.56.251 (Netherlands, North Holland, Amsterdam)

Hello! I'd like to write a script to download videos from streamingcommunity.estate from a given video URL, and to do this I need the m3u8 file url. Currently I manually go to the network tab to search for it, but I'd like the script to do this automatically. Do you know of a way to achieve this? Bash or Python if possible, otherwise any other method will do fine. Thanks in advance!

Hello! I just installed jellyfin and wanted to access it with https. So, as I did yesterday for other apps (immich) in nginx proxy host I created a new proxy host, set the domain (jellyfin.mydomain.duckdns.org), set "create new SSL certificate", "I agree on let's encrypt stuff" and clicked save. Ports 80 and 443 are the only ports exposed on my router.

After some loading, internal error. searching on the web I tried the followings:

• tried with and without "force SSL"
• open port 81 on the router [source]
• checked Use a DNS Challenge as explained here

but internal error was always there. Any idea what could be the problem? and why yesterday everything worked flawlessly?

EDIT: I rebooted and then i couldn't even log in, bad gateway error. after some troubles I do not remember I achieved to log in, and now the SSL certificate has been added correctly!

Hello! I want to find the instrumental version (no vocals, only instruments) of a song (devils in the mist by overkill) but can't find it anywhere, not on spotify nor YouTube nor Googling it... Any tips?

Hello! Since I'm unable to find a public searxng instance that could work for more than a week and sadly cannot selfhost one, I'm looking for a replacement. I so found Swisscows, that promise to be privacy respecting, but here on lemmy didn't find any opinion on it. Do any of you use it? Why or why not?
I'm also considering Qwant and Mojeek.