this post was submitted on 29 Jan 2024
248 points (98.1% liked)

Technology

60033 readers
2683 users here now

This is a most excellent place for technology news and articles.

Our Rules

  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots

founded 2 years ago
MODERATORS
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
248
Amazon terminates iRobot deal, Roomba maker to lay off 31% of staff (www.cnbc.com)
submitted 10 months ago by [email protected] to c/[email protected]
51 comments fedilink hide all child comments
 

Amazon terminates iRobot deal, Roomba maker to lay off 31% of staff::Amazon and iRobot said regulatory concerns made it impossible for the deal to move forward, sending the Roomba makers' shares plummeting.

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 14 points 10 months ago (2 children)

What options are there out of the box? I only know of hacking well known brands and use something like valetudo

[–] [email protected] 2 points 10 months ago* (last edited 10 months ago) (2 children)

I put a wemos d1 mini in mine since all I need to do is mash the existing Clean button. The internal MCU runs on 3.3v, the buttons are pulled low and activated by the same 3.3v rail, so all I had to do was flash it with ESPhome and wire the low side of the buttons to a gpio. I wanted to read the LED state but the multiplex scheme wasn't worth decoding. I did use the single analog pin to measure battery voltage, and an input for the roller and blower motors.

[–] [email protected] 12 points 10 months ago (1 children)

Well done. I can't tell if you're shitposting or if this is legitimately the simplest home automation setup.

[–] [email protected] 7 points 10 months ago* (last edited 10 months ago) (2 children)
[–] [email protected] 4 points 10 months ago

Bro’s a menace to robot vacuum companies

[–] [email protected] 4 points 10 months ago (1 children)

That's actually really awesome. Makes me want to get another vacuum

[–] [email protected] 2 points 10 months ago

I used Shark Ion RV750 and RV750N. Basically no parts cross over but the layout is very similar. Both were straightforward to interface with and even had a little slot the board fit in!

[–] [email protected] 1 points 10 months ago (1 children)

Ah nice, so they work completely without internet? I somehow assumed they will need internet for first setup

[–] [email protected] 2 points 10 months ago

I bought them used, so I don't know about initial setup if you bought a brand new one. But yeah the shark isn't even on my wifi, just the esphome.

[–] [email protected] 1 points 10 months ago (1 children)

I’ve heard nothing but great things about Roborock.

[–] [email protected] 1 points 10 months ago

I have one and it works well. Vacuum and moping in one machine that costs a lot less than the irobot equivalent. You can also load it with Valetudo (open source robot vacuum firmware)

https://github.com/Hypfer/Valetudo