this post was submitted on 19 Nov 2023
129 points (78.2% liked)
Technology
59390 readers
2712 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related content.
- Be excellent to each another!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, to ask if your bot can be added please contact us.
- Check for duplicates before posting, duplicates may be removed
Approved Bots
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Source? Why is it expensive?
Pretty sure this person is just talking out of their ass. I found one source from four years ago that showed a price difference of about a buck to manufacture. Yes, that is more expensive, but passing that dollar onto the consumer for some USB-C ports on a motherboard seems pretty reasonable, and by now I'm sure that gap has decreased significantly.
Some of the implementations are pretty expensive, usually the ones found on phones that need to do everything. But they brought the price down with a myriad of different feature supports so you can progressively wind down costs, but with it, features. Not all USB-C ports are made equal. Some ports have the bandwidth but not the power feed, others can be made specially for charging with 48W+ feed, some are stuck at USB 2.0 specs.
I dont remember off the top of my head the exact number of conductors, but it has like 22 or 24 very very fine wires in it, that have to be lined up perfectly on both sides of the (comparatively small) connector to be soldered to equally small pads.
So its much more labor and time intensive to make a USB-C connector, compared to a USB Type A, which has big bulky cables and equally bulky (comparatively speaking) pads.
USB Micro/Mini used tiny wires too, but again.. only about 2-4. So far less time and labor to line them up, and even compared to USBC it can still have larger solder pads to connect to due to the number of conductors vs the 22-24 conductors inside the Type-C connector.
And thats just the connectors and the wires. the support circuitry to actually run it is more complex and expensive as well. Which further increases the cost.
And theres just no reason for it, the number of devices that need and benefit from higher speeds USB-C can support are few and far between, and typical motherboards coming with 1-2 type-C sockets is more than enough to support that for 99.99% of the people, and if you are in some very weird niche case scenario where you need a bunch of USB-C ports, you can get a USB-C PCI-Card (just make sure you get a reputable brand one, and not one of the suspiciously cheap no-brand chinese knockoff ones)
I know for a fact that USB-c is about 1.5× mirco-b.
https://www.adafruit.com/search?q=usb%20breakout%20board
Since USB A is not a slave connector that are no comparable boards on adafruit. So I asked Bing AI: